PHC-E Evaporative Condenser

• Great for large industrial refrigeration projects
• The Parallel Hybrid Condenser offers great flexibility of layout and system design for a variety of situations
• Ranging in capacity from 500 to 8750 Ammonia kW
• IBC Compliant

Hot gas discharged from the compressor enters the condenser coil inlets at the top of the unit. Cooled water from the unit basin is pumped through spray distribution nozzles and floods over the condenser coils. Ambient air is simultaneously drawn into the unit at the top in parallel flow with the water through the coil. A portion of the recirculated water evaporates into the air stream, removing heat from the refrigerant and causing it to condense.

The cooled refrigerant liquid drains out of the sloped coil tubes into a pressurized receiver for return to the system. The recirculated water that did not evaporate falls through a crossflow fill section located below the coil. Air is drawn through the side of the unit and fill section, removing additional heat from the water through further evaporation. The cooled water collects in the basin for recirculation over the coil.

The hot, saturated air from both the coil and fill sections passes through internal drift eliminators to strip water droplets entrained in the air stream, reducing water consumption. The unit fan(s) then discharge the saturated air out of the top of the unit at a high velocity, where it dissipates into the atmosphere.

Patented Sensi-Coil® Technology

• An innovation of the already powerful Thermal-Pak II® coil
• Increases total coil surface area by 20%
• Features EVAPCO’s patented CrossCool^TM Internal Tube Enhancement, reducing refrigerant charge
• Hot-dip galvanized for industrial strength corrosion protection

EvapPak® Fill

• Constructed of inert polyvinyl chloride (PVC)
• Resistant to rot or decay
• Capable of water temperatures up to 50°C
• Flame spread of less than 25 under ASTM-E84

Drift Eliminators

• Limits the drift rate to less than 0.001% of the recirculating water rate
• Limit the potential of spreading Legionella
• Constructed of an inert polyvinyl chloride (PVC)

Pressurized Water Distribution System

EVAPCO's Zero Maintenance ZMII® spray nozzle remains clog free while providing even and constant water distribution, providing the industry's best performing non-corrosive, maintenance-free water distribution system.

• ZMII spray nozzles have a 1-1/4" diameter opening and a 1-1/4" splash plate clearance
• Mounted in corrosion-free PVC water distribution pipes 
• Provides unequaled coil coverage and scale prevention

Stainless Steel Water Touch Basin

• Available in Type 304 or Type 316 Stainless Steel
• Includes the entire basin area including the support columns
• Welded basin seams for leak-free operation

Stainless Steel Casing & Fan Section

• Available in Type 304 or Type 316 Stainless Steel
• Includes the entire upper section

FACTORY-MOUNTED Water Treatment Systems

Single coil units are available with factory-mounted water treatment systems, providing environmentally sensitive alternatives for treating water in evaporative cooled equipment.

• SmartShield® solid chemical water treatment system
• Pulse-Pure® CHEMICAL-FREE water treatment system

Maintenance Accessories

Available with multiple equipment options to aid in the maintenance of the condenser.

• External Service Platform
• Ladder
• Perimeter Handrails
• Internal Walkway
• Internal Drive Platform
• Sump Sweeper Piping